NXF-742 系列

光纖轉換器

UBLink備有其他規格產品,歡迎洽詢

NXF-742 : Enhanced 10/100Base-TX to 100Base-FX Converter

The NXF-742 Media Converter is a compact, cost-effective and feature-packed solution for expanding an existing Ethernet / Fast Ethernet network. For total reliability the converter boasts enhanced features such as remote and local loopback testing, auto-negotiation, and link-fault signaling. It also features seven DIP switches for manual activation of the enhanced features. This gives the NXF-742 the ability to be quickly integrated into a network configuration.
The NXF-742 can support a variety of fiber optic cables and connectors. Whether data is transmitted over multi-mode, single mode or long-haul single-mode fiber optics, or operating in full or half-duplex mode, the NXF-742 is capable of handling all the various cable-type configurations.

Features

‧ Automatic MDI/MDI-X selection on RJ-45 port
‧ Link Fault Signaling (LFS)
‧ Store-and-forward at full wire speed
‧ Auto-negotiation, NWay support
‧ Half / Full-duplex mode selection
‧ Remote and local loopback Test via DIP switch
‧ When DIP switches are set, the system auto-reboots
to new configurations without powering off.
‧ Extends distances to up to 2km (6600 feet) multi-mode
fiber and 60km (198000 feet) long-haul single mode fiber
‧ Compatible with other 10Base-T & 100Base-TX/FX devices
‧ LEDs for at-a-glance device status
‧ Suitable as stand-alone or in a 19" 4 or 12-slot rack-mounted
converter chassis or in a single-slot mini chassis (with internal power supply)
‧ FCC Class A & CE approved

Specification

Standards	IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX/FX
Connector	1 x RJ-45 1 x Fiber (ST/SC; WDM)
Max. Distance	UTP:100 meters (Cat. 5/5e/6) Fiber:up to 120km (single-mode)
Unit LED	100: Green, illuminated when data packets are being transmitted at 100Mbps LFS: Red, illuminated when a break or disruption exists in copper or fiber links LNK: Green, illuminated indicates receiving link pulses from compliant device ACT: Green, flashing to indicate data packets being sent / received FDX: Amber, flashing to indicate unit is in full-duplex mode COL: Amber, flashing to indicate collision PWR: Green, illuminated to indicate unit is operating under normal power
MDI/MDI-X	Auto Selection
Power	Power Input: 12V DC, external power supply adapter Frequency: 47Hz to 63Hz
Temperature	Operating: 0°C to 50°C Storage: -20°C to 70°C
Humidity	Operating: 10% to 90% RH Storage: 5% to 90% RH
Emissions	FCC Part 15 of Class A & CE approved
Dimensions	109.2 x 73.8 x 23.4mm (D x W x H)
Weight	158g
Dip Switches	DIP 1 - Enables / disables auto-negotiation DIP 2 -Copper port (RJ45) duplex mode; full-duplex or half-duplex DIP 3 -Copper port (RJ45) data bit rate; 10Mbps or 100Mbps DIP 4 -Fiber port duplex mode; full-duplex or half-duplex DIP 5 -Enables / disables link fault signaling (LFS) DIP 6 -Enables / disables local loop back (LLBK) DIP 7 -Enables / disables remote loop back (RLBK)

點擊數：5963